How An Air Conditioner Works

If you find that your home is too hot for comfort, try reducing the temperature setting by a degree or two to see if you feel cooler. Continue to reduce your temperature setting by one or two degrees until everybody is consistently comfortable. As you experiment with finding the setting that works for you, consider using some of the energy-saving and comfort-enhancing tips that follow. Determining the right answer for you will require some experimentation with different settings. It will also require determining whether you are more interested in achieving lower electricity bills, higher comfort levels or a balance of both.

First and foremost, your monthly utility bills will almost certainly go down versus traditional central cooling systems. Next, you may get a tax credit for updating your old, outdated AC system. Finally, in terms of comfort, high efficiency units dehumidify the home, preventing any dry air. In fact, you can get more specific and look at room size if you’re thinking about installing a window unit. Overall, the larger the area that needs to be the cooled, the more expensive your air conditioner will be.

Under- or oversizing can cost you performance, comfort and efficiency related issues when it comes to both the furnace and the air conditioner. Undersizing will, of course, result in the unit being unable to meet the desired temperature setting. Aside from the issue of your comfort, undersizing the equipment and/or material will most likely lead to the premature failing of the units.

They have convection heating systems or baseboard heat, and all the ducts and vents will need to be installed. This is costly (up to $3,000), so think about window units or a ductless split system instead. If you’re looking to install central air rather Air Conditioning Residential Brisbane than a window unit, it may be cost effective to install central heating at the same time, as both usually utilize the blower from the furnace. If you already have central heat, you can use the existing fans and system when installing central air.

You might consider upgrading to a heat pump system or a dual fuel system which can reduce energy costs during the spring and fall heating seasons. Often times a heating an air conditioner system that are more than 10 years are outdated in terms of efficiency. 10 SEER and 78% AFUE for your furnace means your system is at the bare minimum operating efficiencies.

As you might expect, all are cheaper alternatives than central air. We know, here in Houston, that it is no fun when you have an AC failure. Especially since failures usually happen in the dead of summer. Although we usually offer our customers with failures a portable AC unit if we can’t get things back up and running right away, these units only cool a portion of your home. If you have two AC units in your home, you can rely on one unit to keep your family cool while the other is receiving an AC repair, simple maintenance, or even getting replaced with a new AC installation.

For a window central air conditioner, you can expect to pay around $350, while a ductless mini split system costs $1,200 on average. Installing air conditioning costs between $3,350 and $5,912 with most homeowners reporting spending $4,631 on average. This price is typical of installing a new AC unit to your forced air furnace.

Change to the setting to COOL mode to reduce the amount of moisture being removed from the room. Some models may allow a hose to be connected for continuous drain. E5 Error code indicates that the water collection tank is full. To drain the water collection tank completely, leave the bottom drain cap off long enough to allow any residual water to drain out.

A unit’s SEER rating can be found on the yellow Energy Guide tag affixed to all appliances. When you’re purchasing a new AC unit for your home, look for Energy Star® and Energy Guide labels. Units with an Energy Star® label are 15% more efficient than those without a label, and installing one can get you a tax break and possibly a rebate. H3 and E8 errors can occur when units are operating in high humidity / high temperature environments.